Home >

Slip Resistant Floor Wax
Slip Resistant Floor Wax
Alternative Views:

Our Price: $39.00

Container Size:

Description Q & A
• A+ commercial grade quality
• Good for high traffic areas
• Detergent resistant
• Meets UL slip resistant standards wet and dry
• Easy to apply
• Glossy look
• Helps protect floor from scratches

Our Slip Resistant Floor Wax is a top-quality solution meeting UL Slip Resistant standards in homes, restaurants, nursing homes, and hospitals where surfaces can be either wet or dry. It provides an exceptional depth of gloss giving a “wet-look” that will reveal the hidden beauty of your floors. It resists scuff marks so your floors will look attractive in addition to being safe!
This commercial grade wax is made from a water-based formula that is urethane fortified. Your floors will hold up to extremely heavy traffic and spilled liquids will “bead up” making clean-up quick and easy! Slip Resistant Floor Wax requires only one coat to provide excellent slip resistance making your floors safer both wet and dry. It will make a huge difference even if you are wearing socks. We’ve had reports of our Slip Resistant Floor Wax being helpful for pets as well!

- Tile is designed to be the least porous as possible and to resist everything it can. As a result, coatings such as our wax may not adhere without first using our etching treatment to open the pours and allow the wax to sink in. As a general rule of thumb, glossy tiles such as Marble and Wall tile are the ones that have encountered issues. If your tile has a “matte finish” or has a texture to it then you should be okay. In order to be sure, we recommend you test a single tile using our “scratch test” to confirm adhesion before coating the whole floor. If the coating scrapes off easily, then you must use our etching treatment before application. As a note, our product adheres just as well as anyone else’s.

- To prevent people from refilling the bottle with water, we do not under any terms or circumstances accept this product back after it has been opened. If you would like to test the product first, you may purchase a test sample.

- This product is not for use on hardwood floors, outdoors, or areas with standing water.
How To Use
    NOTE: This brief description is for illustration purposes only. Do not attempt to use this as directions. The full directions must be consulted before applying. The full directions are listed at http://www.slipperytile.com/print-wax-directions
    1. Test for a previous finish
    2. Strip previous finish if one is found
    3. Clean and prep surface
    4. Perform Scratch adhesion test
    5. Apply product
    6. Wait 12 hours before resuming normal use.
    The new finish must be damp mopped with either a pH neutral cleaner or fresh water only. The preferred method of cleaning is using a damp mop and fresh water. The pH Neutral cleaner should be used as a replacement for soap when a surfactant is needed.

Share your knowledge of this product. Be the first to write a review »
Copyright ©  Johnny Grip Products, INC.. All Rights Reserved.Built with Volusion