Home >

Slip Resistant Wax Stripper
Slip Resistant Wax Stripper
 
Alternative Views:




Container Size:


Qty:
Description Q & A
 
• Liquefies finish for easy pick up
• Can be used with hot or cold water
• Concentrated
• Works fast
• No neutralizer required
• Butyl-free
• Low foaming
• Resists clogging of pads
• 1-gallon is enough for 1,400 Sq. Ft.
• 16-oz is enough for 175 Sq. Ft.


Our powerful concentrated wax stripper will cut through multiple layers of floor wax finish fast! The usually labor-intensive task of stripping the floor suddenly becomes easier and much more manageable. There are several key areas in which our floor stripper rises above the competition. Our product liquefies the floor finish, helping to keep your stripping pads clean for longer and prevents clogging. All that is needed to pick up the finish is light scrubbing and a Wet/Dry Vac.

Another advantage our wax stripper has is that the floor doesn’t have to be neutralized afterwards. This is because our pH is already at the correct level. When you look at the reasons why our wax stripper performs better than competing products, it becomes very clear how we can help you reach your goals while saving time and money.

RETURN POLICY: To prevent people from filling the bottle up with water, we do not except this product back after it has been opened. If you would like to test the product you may purchase a sample first.
How To Use
  • Directions can be printed from http:www.slipperytile.com/print-wax-stripper-directions

    TOOLS NEEDED
    • Bucket/rag mop • Wet/dry vac • Long Handle Bladed Scraper or swing machine.

    1. Mix the amount of concentrated Wax Stripper needed with hot or cold water at a 1:4 ratio (32 fl. oz, pr gallon of water). Note: Every 1 1/4 gallons of mixed product will cover 350 Sq. Ft.

    2. Mop the solution on the floor ensuring complete coverage.

    3. Let product stand for 10 minutes. (Do not allow solution to dry on floor)

    4. Using the Long Handle Scraper, scrape the entire area well, being sure to break loose all stubborn wax.
    Note: If you have over 300 Sq. Ft. you may want to use a walk behind Machine Scrubber.

    5. Using a wet/dry vac thoroughly suck up all product from floor. If the solution is starting to dry up, you can apply fresh water to reactivate it.

    6. Rinse the floor well using fresh water, being sure to scrub the floor lightly with the mop. Suck the water up and then repeat. The floor must be rinsed twice with fresh water.

Share your knowledge of this product. Be the first to write a review »
Copyright ©  Johnny Grip Products, INC.. All Rights Reserved.Built with Volusion